Generally, the packaging box has two kinds of corners: right angle and round corner, and the process methods are different. Generally, only the packing box with thin gray plates can be customized with rounded corners, and the thicker gray plates must be made with right angles. Let’s talk about the difference between right angles and full angles. First of all, their methods are different. The right angle is formed through the v-slot of the v-slot machine, and the round corner is directly pressed by the beer machine and then folded in on the reverse side.
It can be seen that the customized round corner of the packaging box is directly less than a right angle, which is why the price of the round corner box is relatively cheap. Round corners and right angles can be said to have their own merits. Some people think right angles are beautiful, while others think round corners are beautiful. But when it comes to practicality, it is better to use a right angle. The packaging box customization factory knows that the outer box of the flip box needs to be able to fold to 120 degrees. There is such a way that the flap can be closed normally. If it is rounded, it must not be so large and short. Only the right angle v120 degree slot can be used. Kaierda Packaging, a customized manufacturer of packaging box, believes that the box with v-groove is better.
Of course, in some special cases, v-groove is not allowed. For example, if the edge is too short for the blank holder position of v-groove, it can only be rounded. If you want to be beautiful and practical, it is recommended to use the right angle of the v-groove. If you want to save money and be cheaper, use the rounded corner.
Post time: Feb-10-2023